The ES30TI Series combines the power of a thermal imager with the precision of an Esprit pan/tilt to create a single, fully integrated and addressable thermal positioning system. At the center of the ES30TI is an uncooled long-wave infrared (LWIR) camera and oxide microbolometer. It offers 320 x 240 thermal video with a pixel size of 38 µm and supports 2X digital zoom.
The ES30TI Series provides excellent sensitivity below 40 mK.
It has the capacity for various display formats, including warm white, warm black and color signatures. The ES30TI is available with three different lens configurations – focal lengths of 14.25 mm, 35 mm and 50 mm – for effective deployment in a wide variety of applications.
A powder-coated aluminum construction makes the ES30TI Series ideal for indoor or outdoor applications. The system has an absolute operating temperature range of -50 to 140°F (-45 to 60°C). Within two hours of warming up, the unit can defrost completely and be operated from a temperature of -13°F (-25°C).
A heater, defroster/window defogger, sunscreen and insulation blanket are standard features incorporated into the ES30TI Series. All units also have an auxiliary open-collector output that operates for two seconds before switching off.
The variable pan and tilt speeds of the ES30TI Series range from 0.1 to 40 degrees per second in manual pan mode and 0.1 to 20 degrees per second in manual tilt mode. The turbo and pre-positioning pan speeds are 100 degrees per second at wind speeds of 50 mph (80 km per hour) and 50 degrees per second at the wind speed profile of 90 mph (144 km per hour). The tilt pre-positioning speed is 30 degrees per second. The ES30TI is capable of 360-degree continuous panoramic rotation. The tilt range allows horizontal viewing from +33 to -83 degrees. There are 64 programmable pre-positioning positions with an accuracy of ¼ of a degree.
The ES30TI Series systems are available with a 24 VAC input voltage or with a selectable 120/230 VAC power supply. The ES30TI also has a connection recovery mode that allows the user to specify in which operation the system will be restarted whenever the power fluctuates.
GENERAL SPECIFICATIONS
- Construction
Cast and structured aluminum sheet; stainless steel hardware.
- Finishing
Gray polyester powder coating
- Display window
3mm thick rigid carbon-coated germanium
- Operating temperature
-50ºF to 122ºF (-45ºC to 50ºC) for sustained system operation or 140ºF (60ºC) absolute maximum. Within two heating loads, the unit can defrost completely and be operated from a temperature of -13ºF (-25ºC).
- Operating Environment
It will remain operational in wind conditions of 90 mph (144km per hour) and can withstand wind conditions of 130 mph (209km per hour).
ELECTRICAL SPECIFICATIONS
- Input voltage
24, 120 or 230 VAC; 50/60 Hz; selectable switch for 120/230 VAC inputs.
- Energy consumption
Maximum 70 VA per system.
- Heater and defroster
Controlled by thermostats
- Electrical connections
Two power supply connections, made at the local base with wire connections and a ground terminal; a BNC receptacle and four interconnection PCB terminals at the local base for Pelco D and Pelco P RS-422 protocols; two wire splices for auxiliary open-collector output.
- Auxiliary 2
Open-collector output with 2-second activation; the connected relay must not require more than 32 VDC and 40mA to energize the relay coil; wire length between Espirit and the relay must be less than 100 feet (30m).
CERTIFICATIONS/CLASSIFICATIONS/PATENTS
- CE, Class B (all models)
- UL Listed (NTSC models)
- UL listed to Canadian safety standards (NTSC model.
- FCC, Class B (NTSC models)
- Meets NEMA type 4X and IP66 standards.
- US Patents 340,940 and 5,224,675
MECHANICAL SPECIFICATIONS
- Panning movement
360º continuous panoramic rotation
- Vertical inclination
Without obstruction +33º to -83º
- Manual pan/tilt speeds
- Pan
- 0.1º -40º/sec variable speed operation.
- Tilt
- 0.1º -20º/sec variable speed operation.
- Pan
- Pre-positioning speeds
- Panoramic
- 100º/s
- Tilt
- 30º/s
- Panoramic
- Camera mounting
Integrated camera support set.
- Locks
A single bracket lock, stainless steel lock no. 3; secure with padlock (not supplied)
THERMAL CAMERA/OPTICS
- Detector
Microbolometer without cooling, vanadium oxide (VOx)
- Format of the set
320 x 240
- Pixel size
38µm
- Video output
NTSC/PAL
- Source of standardization
Internal shutter (travel only), 0.7 s glass freeze during shutter closure.
- Time for image
Less than 2 seconds, without thermoelectric cooler (TEC)
- Image control
2X digital zoom
- Serial command
RS-232 compatible
- Scene temperature range (lens dependent)
For standard 150ºC; optional gain mode.
- Lens options
- 14.25 mm lens, F1.3
- 35 mm lens, F1.4
- 50mm lens, F2.0
